The Klingelnberg PSKE 900 bevel gear prout machine is designed for the universal single-flank design of cone and crown rims. Here, gears can be measured and graphically evaluated by means of single-flank and two-flank welding. These test methods are particularly suitable for determining errors in the gear geometry such as concentricity and axial runout properties, deviations or pitch errors. Here, a practical installation situation of a gearing outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated before assembly.
The following parameters can be measured here:
- Einflankenabweichungen Fi', fi', fl', fk'
- Flankenspiel
- Rundlauf, Rundheit (Option)
- Tragbild mit digital Kamera
- Teilungsabweichungen
- FFT-Analyse, Spektrum
| Technische Daten |
|
| Raddurchmesser - max |
500 mm |
| Spindelbohrung Rad |
90 mm |
| Spindelbohrung Ritzel |
90 mm |
| Max. Einbaumass, Rad/ Ritzel |
100…350 mm/ 100…350 mm |
| Hypoid Verstellung |
keine |
| Winkelverstellung |
45-135 grad |
| Max. Drehzahlen |
30 U/min |
| Bremse |
mechanisch |
| Max. Radgewicht |
50 kg |
| Abmessungen (LXBXH) |
1300 x 1300 x 1500 mm |
| Maschinengewicht |
1800 kg |
| Genauigkeit DIN 3965/ Class 1 |
|
Illustration shows machine in the current state as used machine
For further questions and information, please contact us at any time under the number +49 201 4306 007 or
by Email.......... available.
.JPG "Klingelnberg PSKE 900 - used")
.JPG "Klingelnberg PSKE 900 - used")
.JPG "Klingelnberg PSKE 900 - used")
.JPG "Preview: Klingelnberg PSKE 900 - used")
.JPG "Preview: Klingelnberg PSKE 900 - used")
.JPG "Preview: Klingelnberg PSKE 900 - used")
.JPG "Klingelnberg PSKE 900 - used")
.JPG "Klingelnberg PSKE 900 - used")
.JPG "Klingelnberg PSKE 900 - used")
.jpg "Preview: Klingelnberg PKE 140 / Retrofit EN")
.jpg "Preview: Klingelnberg PKE 140 / Retrofit EN")
