Gearmachines EN

Main page » Gearmachines EN

gear machines are special machines and are used for the economical production of tooth machines. These include gear machines, gear machines, and most recently also machining centers that produce the tooth shape using tools such as washers, discs, shafts or ET machines in the process or individual part process.

» Gearmachines - Manufactor

» Videos to Gearmachines

The areas of application of the machines are in the automotive, agricultural machinery, construction machinery, machine tools, mining technology, aircraft, textile machinery, gear and transmission manufacturers, as well as manufacturers of pumps and rotors. They can be used for individual production, small series production, as well as for mass production.
manufacturers of gear machines include Gleason Pfauter, Hoefler, Liebherr, Klingelnberg, Modul, Maag, Samputensili, Lorenz, Fellows, Kolomna, Saratov, Romania....

Here you will find information about gear machines, technical descriptions, pictures and videos presented as:

»	Used, konventionell with change gears
»	Partially modernized, geometrically overhauled, with new PLC
»	Retrofit, as CNC conversion, completely modernized with new control Siemens 840 D and acceptance according to CE standard
»	New machine, designed for one-off production, small series or with automation for series production
»	An overview of currently available machines can be found here..........

Klingelnberg PSR 500 retrofit used

Technical data & nbsp;	& nbsp;
Max. Worm wheel diameter	500 mm
Max. Worm length	1000 mm
Max. Screw diameter	150 mm
& nbsp;	& nbsp;

More information ........

More about...

Heidenreich & Harbeck 26 ST Bevel gear grind

Heidenreich & Harbeck 26 ST Retrofit

CNC Conversion
Works Ø: 280 mm, Module: 8 mm

More about...

Klingelnberg AMK 852

Kegelradfräsmaschine Klingelnberg AMK 852, used - Gearmachines

https://www.gearmachines.de/de/kegelradfraesmaschine-klingelnberg-amk-852.html

Bevel gear machine Klingelnberg AMK 852, used machine, optionally available with bevel gear prüfmaschine for load-bearing or single-flanking

More about...

TOS OHA 32 _0720

More about...

Burri BZ 70 H

* First hydraulic-free generating, profile and worm grinding machine for the smallest of gears ..... Work piece Ø: 10 - 70 mm, module: 0.5-3 mm

More about...

Heidenreich & Harbeck

More about...

Hoefler Helix 400

More about...

Lor ZST 350 CNC

New machine , designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 828 D control; digital drive technology SINAMICS; Delivery time on request.
Work piece: 320 mm, module: 6 mm, tooth width: 110 mm
More information?

More about...

Richardon R 160 H

Horizontal hobbing machine
Workpiece: 160 mm, module: 4.5 mm, axial travel: 410 mm

Figure shows used machine, can be retrofitted on request, completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, control SINUMERIK 840 D SL; digital drive technology SINAMICS
Tobe offered.

More about...

Burri BZ 300

Wälz,, profile and screw grinding machine.... newly developed machine concept from Burri, with integrated charging station with 4-axis gantry loader

work Ø: 10-300(400) mm, Module: 0.5-7(10) mm

More about...

Modul ZFWZ 400

gear hobbing machine
Workpiece Ø: 400mm, module: 6 mm, axial travel: 275 mm

Figure shows second-hand machine, can be used as a retrofit, partially modernized with new PLC or as CNC conversion completely modernized, designed for highest performance and accuracy with flexible production, acceptance according to DIN and manufacturer standard, control SINUMERIK 840 D SL, digital drive technology SINAMICS....... be offered
More information?

More about...

FFG MODUL

More about...

EWF 6000 CNC

Extruderwellenfräsmaschine
Werkstück-Ø: max. 250 mm, Einspannlänge: 6000 mm

Die Abbildungen zeigen Extruderwellenfräsmaschine EWF 6000 als Neumaschine mit stabilem Schrägbett für höchste Anforderungen, ausgerüstet mit moderner CNC-Steuerung Siemens 840 D SL und Softwareoptionen für Sonderprofile, speziell für Extruderwellen. Diese Universalmaschine wurde kann zur Fertigung von Schnecken, Rotoren, Gewinden, Extruderwellen und Verzahnungen für diverse Industrien und Einsatzgebiete entwickelt.
Fragen zur Maschine?

More about...

Klingelnberg GKC 60 CNC EN

Bevel gear testing machine
Wheel diameter: max. 600mm, wheel width: 450 / 600mm, axle offset: +/- 60mm

Figure shows bevel gear testing machine as a used machine, is delivered as a CNC conversion , completely modernized including a new control, designed for maximum performance and accuracy. K designed for single and double flank testing and testing of tapered gears, crown gears, toothed gears.
Questions about the machine?

More about...

Burri BZ 130

New machine

Workpiece Ø: 10-130 mm, module: 0,5-3 mm
* Newly developed machine concept from Burri, with a patented axle concept and a chip with chip-time of 2 seconds, latest CNC control, dialog-driven user interface with touch screen, digital drives, newly developed profiling unit, designed for highest performance and accuracy with flexible production.

0,00 EUR

Lorenz LS 180 CNC

Used machine
Work piece: 280 mm, module: 5 mm, tooth width: 60 mm

* Very good condition, completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS;

More about...

GT 200 SP

More about...

Gleason Phoenix G 200

Used Machine / CNC Conversion
Working station Ø: 200 mm, Module: 8 mm
* Option as retrofit, completely modernized, with the latest CNC control (Siemens 840 D), dialog-enabled operating interface, digital drives, designed for the highest performance and accuracy with flexible production.

More about...

Klingelnberg WNC 80

CNC Conversion
Werkstueck Ø: 800 (960) mm, Module: 18 mm
*Retrofit, built on the basis of a Klingelnberg / Dr. Wiener WNC 800, completely modernized, with the latest CNC control (Siemens 840 D), dialog-enabled operating interface, digital drives, designed for the highest performance and accuracy in flexible production.

More about...

Klingelnberg WNC 20

CNC Conversion
Works Ø: 280 mm, Module: 8 mm
*Retrofit, built on the basis of a Klingelnberg WNC 20, completely modernized, with the latest CNC control (Siemens 840 D), dialog-enabled operating interface, digital drives, designed for the highest performance and accuracy with flexible production.

More about...

Gleason 104

kevel gear machine
Factory: 220 mm, Module: 6(8) mm

image shows Retrofit. CNC conversion completely modernized, designed for the highest performance and accuracy with flexible production, acceptance according to DIN and manufacturer standard, control SINUMERIK 840 D SL, digital drive technology SINAMICS.......
More information?

More about...

Wanderer GF 404

gear, thread, rotor machine
Work cycle: 400 mm, Module: 10 mm, Axial travel: 4000 mm

Figure shows retrofit, completely modernized, designed for the highest performance and accuracy with flexible production, acceptance according to DIN and manufacturer standard, control SINUMERIK 840 D SL; digital drive technology SINAMICS
More information?

More about...

Holroyd 3 EX

rotorfräsmaschine
Work cycle: 350 mm, Module: 50 mm, Axial travel: 1200 mm

Figure shows Retrofit, completely modernized, designed for the highest performance and accuracy with flexible production, acceptance according to DIN and manufacturer standard, control SINUMERIK 840 D SL; digital drive technology SINAMICS
More information?

More about...

Gleason Pfauter P 400 H x 4000

Wälzfräsmaschine horizontal
Factory work: 450 mm, module: 12 mm, axial travel: 4000 mm

Figure shows Retrofit, completely modernized, designed for the fastest performance and accuracy with flexible production, acceptance according to DIN and manufacturer's standard, control SINUMERIK 840 D SL; digital drive technology SINAMICS
More information?

More about...

Gleason Pfauter P 250 H x 2000

Abwälzfräsmaschine horizontal
Factory line ück Ø: 300 mm, module: 12 mm, axial travel: 2100 mm

More about...

Lorenz LS 424

CNC conversion , completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS; Delivery time on request.
Work piece: 420 mm, module: 8 mm, tooth width: 130 mm
More information?

More about...

TOS OHA 32 B

Retrofit CNC conversion , completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS; Delivery time on request.
Workpiece: 320 mm, module: 7 mm, tooth width: 70 mm
More information?

More about...

Liebherr WS 1500

CNC conversion , completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS; Delivery time on request.
Work piece: 1500 mm, module: 22 mm, tooth width: 330 mm
More information?

More about...

Liebherr WS 501

CNC conversion , completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS; Delivery time on request.
Work piece: 500 mm, module: 6 mm, tooth width: 120 mm
More information?

More about...

Lorenz LS 1000

CNC conversion , completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS; Delivery time on request.
Workpiece: 1000 mm, module: 10 mm, tooth width: 200 mm
More information?

More about...

Lorenz LS 630

CNC conversion , completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS; Delivery time on request.
Work piece: 630 mm, module: 12 mm, tooth width: 200 mm
More information?

More about...

Klingelnberg PSR 500 EWP

Technical data & nbsp;	& nbsp;
Max. Worm wheel diameter	500 mm
Max. Worm length	1000 mm
Max. Screw diameter	150 mm
Center distance	0 ... 400 mm

More information ........

More about...

Klingelnberg WNC 30

CNC Conversion
Werkstueck Ø: 300 (410) mm, Module: 1-8 mm
*Retrofit, built on the basis of a Klingelnberg WNC 30, completely modernized, with the latest CNC control (Siemens 840 D), dialog-enabled operating interface, digital drives, designed for the highest performance and accuracy in flexible production.

More about...

GMS 32

More about...

Lorenz MCS 60

CNC conversion , completely modernized, designed for maximum performance and accuracy with flexible production, acceptance according to DIN and manufacturer standards, SINUMERIK 840 D SL control; digital drive technology SINAMICS; Delivery time on request.
Work piece: 750 mm, module: 10 mm, tooth width: 205 mm
More information?

More about...

Pfauter PE 300 H x 1250 (2000)

Abwälzfräsmaschine horizontal
Movement ück Ø: 350 mm, Module: 10 mm, Axial travel: 1250 (2100) mm

More about...

Burri BZ 130

New machine

Workpiece Ø: 10-130 mm, module: 0,5-4 mm
* Newly developed machine concept from Burri, with a patented axle concept and a chip with chip-time of 2 seconds, latest CNC control, dialog-driven user interface with touch screen, digital drives, newly developed profiling unit, designed for highest performance and accuracy with flexible production.

More about...