The bevel gear testing machine Klingelnberg PKE140 is designed for the universal rolling inspection of bevel gears, crown gears and gear wheels.
Here, gears can be checked and evaluated conventionally using single-flank and double-flank gear testing.
Description:
The wheels are tensioned by means of a threaded rod (spindle bore 30H4)
With the device you can check the contact pattern, the center distance and the swivel angle can be set using gauge blocks and a dial gauge.
The device is also suitable for 2-flank testing and backlash measurement, evaluation using a 0.01 dial gauge.
The drive is carried out by means of a handwheel.
1.Technical parameters
Maximum diameter of the wheel 140 mm
Installation dimension, maximum 90 mm
Setting angle, adjustable bar 50 - 140 degrees
Spindle bore wheel 30 H4
Spindle bore pinion MK4
Dial indicators Mitutoyo
For further questions and information we are available at any time under the number +49 201 4306 007 or by email ...........
_250_4.jpg "Preview: Klingelnberg PSKE 900")
.jpg "Preview: Klingelnberg PKE 140 / Retrofit EN")
.jpg "Preview: Klingelnberg PKE 140 / Retrofit EN")
