Worm Gear Tester

Schneckenpruef_1 Schneckenpruef_2 Schneckenpruef_3 Schneckenpruef_4

worm wheel testing machines are designed as running test machines for the universal testing of worm wheelsets and crown wheels and are used to determine errors in the gear geometry that have a negative effect on the running properties and noise formation of gear parts.

extruder_vid » Videos about worm gear testing

Here, a practical installation situation of a gearing outside the gearbox under real load conditions is simulated by means of flaning roller test or two-flank rolling test and then evaluated.
This test method is particularly suitable for the determination of errors in the gear geometry such as round and flat running properties, rolling deviations or division errors. Deviations in the gear geometry, machining errors due to defective tools as well as damage to the gears can thus be detected and eliminated even before assembly

Here you will find information about worm wheel testing machines, technical descriptions, pictures and videos shown as:
» Second-hand machine, conventional with interchangeable wheel  
» Partially modernized, geometrically overhauled, with new PLC  
» Retrofit, as CNC conversion, completely modernized with new control Siemens 840 D and acceptance according to CE standard  
» New machine, designed for individual production, small series or with automation for series production  
» Contact us for more detailed information!  

1 to 5 (from a total of 5)