Bevel Gear Tester Gleson 519

The Gleason 519 is a universal hypoid bevel gear testing machine for testing the bearing pattern, noise and installation dimensions for bevel gear and hypoid bevel gear sets, straight and helical gear sets up to a largest wheel diameter of 610 mm at axis angles between 0 and 180 degrees and up to a wheel diameter of 914 mm at an axis angle of 90 degrees.
                
Figure shows machine as retrofit, completely modernized, with the manufacturer's data below and is equipped as follows:
 
EQUIPMENT:
Hydraulic workpiece clamping device for both spindles (pinion and wheel) without pull rods and nuts
Pinion spindle with 6" = 152.4 mm diameter at the large cone end (6" diameter x 0.75" cone per foot x 3" long)
power movement of drive head ( in / out )
Wheel spindle with 3-29/32" = 99.219 mm diameter at the large cone end (3-29/32" diameter x 39/64" cone per foot x 3" long)
Setup for "Swing Pinion Cone" (SPC) - Pinion Pendulum Movement for simulation of the bearing pattern at
Achspositionsverlangerungen
Automatic distortion control with preselection of the twisting edge play
Axis angle adjustment via sinus ruler
Absolute scales in the 3 linear axes and digital display
Manual brake on the disc wheel for partial load simulation
Completely new electrical system with new 400V and 50Hz version
Operating instructions, spare parts list, electrical diagrams
 
SPECIFICATIONS
Largest disc wheel diameter at axle angle 90 degrees.....   914 mm
Largest pinion diameter at axle angle 90 degrees ....  305 mm
Largest axle displacement above or below the center .... 152 mm
Axis angle range (infinitely adjustable) ...... 0 – 180 °
Largest wheel diameter for spur gears (axle angle 0 degrees)........    1,245 mm
Largest pinion diameter for spur gears (axle angle 0 degrees).........    635 mm
Largest center distance......  635 mm
Smallest center distance...    0 mm
Diameter pinion spindle at the large cone end ........... 152.4 mm
Cone on the pinion spindle (0.75" per ft.) ...... 19.05 mm
Length of the cone .... 76.2 mm
Diameter plate needle at the large cone end ....... 99.219 mm
Cone on the wheel spindle (0.618" per ft.) ...... 15.47 mm
Length of the cone .... 76.2 mm
Main engine ...... 3.75 kW
Hydraulic motor........................................................................................ 0.55 kW
 
Dimensions:
Length............................................................................. 2,290 mm
Width.............................................................................. 1,905 mm
Height.............................................................................. 1,830 mm
Weight........................................................................................  4,800 kg