GEARMETROLOGY

Main page » Gearmachines EN » GEARMETROLOGY

Gear measuring machines are high-precision machines and are used to meet quality requirements for measuring gears. They are used to test and evaluate gear quality according to DIN or AGMA standards. Defined gear deviations such as pitch, profile, flank line, tooth thickness, surface, radial runout, single- and double-flank pitch deviations are measured here.

» Videos about gear measuring machines

» Videos on Gear Measuring Machines

In addition to the tactile measuring method, there is the option of measuring gears on coordinate measuring machines, contactless using laser technology, as well as on gear running test machines (single-flank rolling test (EWP) or double-flank rolling test (ZWP)) and subsequently evaluating them.

Manufacturers of gear measuring machines include Klingelnberg and Gleason. Pfauter, Niles Kapp, Hoefler, Mahr, Hommel, Wenzel, Zeiss...

Here you will find information about gear measuring machines, technical descriptions, images, and videos presented as:

»	Used machine, conventional with change wheels
»	Partially modernized, geometrically overhauled, with new PLC
»	Retrofit, as a CNC conversion, completely modernized with a new Siemens 840 D control system and approval according to CE standards
»	New machine, designed for individual production, small series, or with automation for series production
»	An overview of currently available You can find machines here........
	Learn more.......

Klingelnberg PSKE 900

T technical data & nbsp;	& nbsp;
wheel diameter - max	500 mm
Hypoid adjustment & nbsp;	+/- 50 mm (option)
Angle adjustment	45-135 degrees

More information ........

ZWP 100 U EN

Liebherr worm gear tester

worm gear tester, suitable for single-flank rolling testing. Installation dimension and contact pattern inspection of worm gear sets, partial gears, max. workpiece diameter 1000 mm, module 40 mm, tooth width 400/axial travel mm...

E-mail

Phone

Max. Worm length 1000 mm Max. Screw diameter 100 mm Center distance 0 ... 500 mm More information........

GT 200 SP

Klingelnberg GKC 60 CNC EN

Bevel gear testing machine
Wheel diameter: max. 600mm, wheel width: 450 / 600mm, axle offset: +/- 60mm

Figure shows bevel gear testing machine as a used machine, is delivered as a CNC conversion , completely modernized including a new control, designed for maximum performance and accuracy. K designed for single and double flank testing and testing of tapered gears, crown gears, toothed gears.
Questions about the machine?

Klingelnberg-PSR-500-retrofit

Worm gear tester Klingelnberg PSR 500

Technical specifications

Max. Worm wheel diameter
500 mm
Max. Screw length
1000 mm
Max. Screw diameter
200 mm
Center distance
0 ... 400 mm

Singl Flank Testing

DESCRIPTION - Principle and software single flank rolling test

The single-flank rolling test is carried out with two test objects (one gear set) or with one test object against a master gear. The toothing meshes with a fixed center distance. This corresponds to the nominal center distance when testing with two work wheels .......

Double Flank Testing

DESCRIPTION - Principle and Software Two-flankingWälzprüfung

In the case of the two-flank cycle, the two-flank cycle and the opposite wheel (or teaching gear) are pressed against each other by a defined, small force......

Bevel Gear Tester Gleson 519

Hoefler EMZ 632

Höfler EMZ 632, used machine Bauj.98, can also be offered as a retrofit, completely modernized
The machine receives new hardware (notebook). The software program runs on Windows 10 interface. The machine is equipped with spur gear program for external and internal toothing. Other software programs on request

Bevel gear tester Klingelnberg PSKE 900 H

Klingelnberg PEK 300 H

bevel gear testing machine, suitable for single-flank rolling testing of bevel gears with evaluation, max. workpiece diameter 450 (300) mm, modulus mm, tooth width / axial travel mm...

E-mail

Phone

Retrofit Klingelnberg PNC 65 EN

Retrofit Klingelnberg PNC 65 EN - Kopie

Wenzel WGT 3520 XXL EN

Zahnradmessmaschine; «WENZEL; «WGT 3520 XXL;, suitable for «Vermessen von Zahnrädern, Zahnstangen», maximum workpiece diameter «Raddurchmesser» mm, max. module «Modul» mm, tooth width «Zahnbreite» mm, control «Steuerung», current status «Zustand»

Klingelnberg P 40 en

The Klingelnberg P 40 gear measuring machine is suitable for measuring gears, bevel gears, worm shafts and worm wheels, maximum workpiece diameter 400 mm, max. module 0.5-15 mm, tooth width 400 mm, control Windows 7, current condition used machine / used

MAAG SP 65

The MAAG SP 65 gear measuring machine is suitable for measuring gears, bevel gears, worm gears, hollow gears, and hobs. Maximum workpiece diameter: 650 (730-internal) mm, max. module: 0.5-15 mm, tooth width: 400 mm, Siemens ONE control system. Current status: Retrofit / Modernized.

Phone

MAAG SP 42

The MAAG SP 42 gear measuring machine is suitable for measuring gears, bevel gears, worm gears, hollow gears, and hobs. Maximum workpiece diameter: 420 (500-internal) mm, max. module: 0.5-15 mm, tooth width: 400 mm, Siemens ONE control system. Current status: Retrofit / Modernized.

Phone

Klingelnberg P 40 en - 070825

DPM 300/600

The D&P 300 / 600 hob measuring machine is suitable for measuring hobs and tools with workpiece diameters up to 300 (600) mm, max. weight 200 / 400 kg, Siemens control system, D+P AG software.

Phone

Klingelnberg GKP 90

Bevel gear testing machine, suitable for noise and contact pattern testing on bevel gears and hypoid gears, 540 (400) mm, max. axis offset ±50 mm, bore diameter of the pinion spindle 90 mm/axial travel mm, control system Siemens 840 D, current condition: used/retrofit

Phone

Klingelnberg-PSR-500-U-Retrofit

Worm wheel testing machine, suitable as a single-flank rolling test machine for worm wheel bearings up to 500 mm in diameter
```

Phone

Klingelnberg T 60 A

Kegelradprüfmaschine, geeignet zum Einflankenwälzprüfung und Geräuschprüfung von Kegelrädern , 500 mm, Drehzahlen bis 3250 mm, Bremsmoment bis 95NM/Axialweg mm, GE Fanuc Series 160i-M, aktueller Zustand Gebrauchtmaschine / used

E-Mail

Phone

Mahr GMX 600 Retrofit

gear measuring machine, suitable for measuring gears, camshafts, rotationally symmetrical components, tools........., max. workpiece diameter 600 mm, module mm, tooth width axial travel 700/axial travel mm...

E-mail

Phone

bevel gear tester UHT 800

Bevel gear testing machine
UHT 800

Workpiece Ø: 800 (900) mm

Image shows used machine, can be delivered as retrofit. CNC conversion completely modernized, designed for maximum performance and precision with flexible production, acceptance according to DIN and manufacturer standards, control, digital drive technology .......
More information?

Klingelnberg PKE 140 / Retrofit EN

The bevel gear testing machine Klingelnberg PKE140 is designed for the universal rolling inspection of bevel gears, crown gears and gear wheels.
Here, gears can be checked and evaluated conventionally using single-flank and double-flank gear testing.......

Gleason WELTER 2000 T

Bevel gear tester, suitable for testing bevel gear sets and gears under operating conditions up to a workpiece diameter of 2300 mm, Siemens 840 D control system

Phone

Klingelnberg LKR 630

- Kopie

Hoefler ZME 402 EN

Technische Daten:
Werkstückdurchmesser: 5-400mm
Modul: 0,5-20mm
Generalüberholung: 2020

Intended use: Suitable for measuring external and internal gears, all parameters, other software on request such as worm and worm wheel.

Gleason No.13 / Retrofit

1 to 31 (from a total of 31)